The belt drive is likewise known for persistent force transmission. 

What is a belt drive? 

The belt is an adaptable component of a mechanical framework. It is utilized to move the force starting with one System then onto the next System.

Types of Belt-Drive:

There are five various kinds of belt drive that can be found and those are:

Open belt drive

Closed or crossed belt drive

Fast and loose cone pulley

Stepped cone pulley

Open belt-drive:

In this, the shafts pivot the very way that implies the heading of turning is equivalent to driving and driven pulley. The shafts are orchestrated in an equal way. 

In the event that the shafts are having more distance among driver and driving pulley then there should be the upper side will be slack side and the beneath side will be the tight side. 

Crossed belt-drive:

Here in the crossed belt drive, the transmitted force is all the more however there is an issue that it can not run quicker. Assuming this is the case then, at that point scouring between belts might mileage.

In this, the shafts pivot the other way. At the intersection side, it rubs, and in this way, it wears and removes.

The belt drive is otherwise called for nonstop force transmission. 

There are five types of belt drive can find such as:

Open belt drive

Closed or crossed belt drive

Fast and loose cone pulley

Stepped cone pulley

Open belt-drive:

In this, the shafts turn the very way that implies the bearing of pivoting is equivalent to driving and driven pulley.The shafts are scheduled the equal way

On the off chance that the shafts are having more distance among driver and driving pulley then there should be the upper side will be slack side and the underneath side will be the tight side. 

Crossed belt-drive:

Here in the crossed belt drive the communicated power is whole the more yet there is an problem that it can not run quicker. Offered that this is true then, at that point furbishing. between belts might mileage. 

In this, the shafts turn the other way. At the intersection side, it rubs and thusly it wears and detaches. What's more, on the off chance that you would prefer not to mileage, place more distance among pulley and run at low speed.

Fast and loose cone pulley:

As the name demonstrates reckless pulley it implies there are two pulleys in it. 

How are these two pulleys placed in it?

The fast pulley is mounted on a shaft with keyed joint and the loose pulley implements uninhibitedly on the shaft and it is unequipped for sending any force. 

Another term in that is the point at which numerous machines are working from a solitary force source then in this condition, each machine has given this reckless cone pulley. 

Stepped cone pulley:

This is otherwise called speed cone. 

Here in the stepped cone pulley, there are more pulleys joined of the various distances across one adjoining another. Stepped cone pulleys are utilized where they need to switch gear or speed of driven shaft change often like a machine (Cone pulley Lathe machine, Milling, and the sky is the limit from there). 

The distance across the driving and driven pulley are with the end goal that when we needed to move to another pulley a similar belt will work.